This range of wood stains made from natural materials highlights the structure of the wood grain and penetrates deep into the wood fibers, offering a high level of protection while allowing it to breathe. The coating does not crack, or peel, and can be easily restored. It is suitable for wooden facades, log buildings, garden furniture, walls, doors, cork coatings, and more.
Available in 10 colours
Instructions for use:
- Shake and stir the container well before use and during the staining process.
- Apply the stain as evenly and thinly as possible on a clean, dry and planed surface, allowing it to soak in for 20-30 minutes. Remove any excess oil with a cotton cloth.
(Any defects in the staining process can be corrected within 40 minutes after the initial application. Intermediate sanding is not necessary.)
- For a rough surface, the oil should be evenly spread across the surface without wiping off any excess.
- After 24 hours*, apply a second coat as thinly as possible. Allow it to absorb. Carefully wipe off any excess stain residue.
*Before applying a second coat, make sure the first coat has fully dried.
During the resurfacing process, sanding is not required. Typically, one layer is sufficient for surface renewal.
Consumption: 5-8 m2/l on rough wood, 8-12 m2/l on planed wood, and 30-36 m2/l on hardwood, depending on the surface’s absorbency.
